Diagnostic Trouble Code – P0380
Description
P0380 – Glow Plug/Heater Circuit “A” Fault
The glow plug system is used to assist in providing the heat required to begin combustion during cold engine temperatures. The glow plugs are heated before and during cranking, as well as initial engine operation. The Engine Control Module (ECM) controls the glow plug ON times by monitoring coolant temperature and glow plug voltage. The California Glow Plug system has eight individual glow plug supply circuits between the controller and the glow plugs. If the feedback voltage from the controller to the ECM is not within range, DTC P0380 will set.
Possible Causes
- Faulty glow plugs
- Faulty glow plug wiring harness
- Bad electrical connector
- Faulty glow plug control module
The contents of HotShotsSecret.com, such as text, graphics, images, and other material contained on the Diagnose Your Diesel section are for informational purposes only. Always seek the advice of your mechanic or other qualified professional with any questions you may have regarding your vehicle’s condition.