6.7L Cummins Fluid Capacity

6.7 Cummins Oil Capacity

Commonly found in Dodge Ram trucks, Cummins engines are diesel engines used in heavy-duty vehicles, including construction equipment, buses and trucks. Cummins engines are powerful enough for towing and hauling while still being relatively fuel efficient. They’re also known for being reliable and durable when properly maintained. Regular oil changes ensure that a 6.7 Cummins engine will go the extra mile for you.

When choosing an oil for a 6.7 Cummins engine, pay attention to the type as well as the quantity. You want to use the best oil for the engine to make the most of your truck.

6.7 Cummins Oil Change Intervals

The best way to reduce sludge buildup and oil dilution is to change the oil in your 6.7 Cummins engine at the recommended intervals. Oil change intervals vary based on the model year. The ideal interval can also vary based on the conditions you drive in and your driving style. 

For 6.7 Cummins engines with a model year between 2007.5 and 2012, the recommended oil change interval is 7,500 miles or every six months, whichever is sooner.

For models after 2013, the recommended interval is every 15,000 miles, six months or 500 hours of use, whichever is sooner. 

Generally speaking, if you drive your truck for extended periods without stopping, such as on highways, you can get more miles between oil changes. If you usually travel in city traffic or with a lot of starts and stops, it’s better to change your oil sooner.  

Best Oil for a 6.7 Cummins

Similarly, the ideal oil for a 6.7 Cummins engine also depends on the model year. 

For all models, synthetic oil is recommended over conventional oil. Synthetic oils have a higher flash point than conventional oils, plus additives that promote flow to reduce friction and engine wear. Although full-synthetic oils tend to cost a bit more upfront, they last longer and support greater engine longevity, which translates to long-term savings. 

The ideal viscosity grade varies based on the model year and your driving climate. Viscosity grade refers to the temperatures at which the oil operates. You’ll want to choose a viscosity grade based on the ambient temperatures in your area or in the areas where you use the vehicle. 

• Model years 2007.5 to 2018: Choose a synthetic 15W-40 oil for temperatures above zero degrees Fahrenheit. For driving in all temperatures, including those below zero, choose a synthetic 5W-40 oil. 
• Model years after 2019: Choose a synthetic 10W-30 oil for driving in temperatures above zero degrees Fahrenheit. To drive in all temperatures, including below zero, choose a synthetic 5W-40 oil. 

Vehicles Not Equipped With Passive Entry without pressing the brake pedal, cycle the ignition to the ON/RUN position. Do not start the engine. Vehicles Equipped With Passive Entry without pressing the brake pedal, push the ENGINE START/STOP button and place the ignition to the ON/RUN position do not start the engine.

Press and release the DOWN arrow button to scroll downward through the main menu to “Vehicle Info”. Press and release the RIGHT arrow button to access the “Oil Life” screen. Press and hold the RIGHT arrow button for one second to access the “Oil Life Reset” screen. Press and release the DOWN arrow button to select “Yes”, then press and release the RIGHT arrow button to select reset of the Oil Life. Press and release the UP arrow button to exit the Electronic Vehicle Information Center screen.