Transmission Stiction Eliminator

Rated 4.77 out of 5 based on 99 customer ratings
(170 customer reviews)

$29.95$89.95

1 qt
1 gal
Clear

Earn up to 90 Points.




international-iconNow shipping to USA, Canada, Australia

Transmission Stiction Eliminator reduces operating temperatures
Eliminates stiction from all automatic transmissions
Reduces coefficient of friction
Transmission stiction eliminator minimizes metal to metal contact
Eliminates rust & corrosion
 Anti-stiction fluid smooths out gear changes
5 year shelf life

TREATMENT RATIO
1 QT / 20 QTS FLUID

Recommended for ALL automatic and CVT transmissions.

SKU: TSE:HSSTSE32Z

Share your thoughts!

4.77 out of 5 stars

170 reviews

Let us know what you think...

What others are saying

  1. Willie G.

    Willie G. (verified owner)

    Can run trans stiction in my Allison transmission?

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • Spencer Williams

      Admin Spencer Williams

      Hello Willie,
      Yes Transmission Stiction Eliminator can be used in your Allison transmission. Please adhere to dosage on the product label.

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Mike Graham

    Mike Graham

    Would this also work in a 1996 Subaru automatic tranny that has 145K miles on it?? The problem is the transfer clutch causes bucking when making a tight turn. It does NOT do it all the time but seems to do it more when it is hot out. On line, folks say to change the transmission/ transfer case oil to help the problem. How much TSE would I need to use, The Subaru owners manual book says the tranny takes 2.6 – 3.2 qt. Any ideas??

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • Spencer Williams

      Admin Spencer Williams

      Hello Mike,
      If you are dealing with a lubrication related issue, TSE is the solution to turn to. The temperature variable makes me believe it is a lubrication error. 5-6 ounces of TSE would treat your transmission if the manual states 2.6-3.2qts as your capacity. Please note, it replaces the transmission fluid, so you’d have to leave out 5-6 ounces of ATF if you do a fluid change or drain 5-6 ounces of ATF if you’d prefer to keep the existing fluid in there.

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Jim Anderson

    Jim Anderson

    Hotshots TSE states “recommended for ALL automatic transmissions”. Please confirm if this includes CVT trannys (i.e. ’07 2.5 Altima).

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • Spencer Williams

      Admin Spencer Williams

      Hello Jim,
      Yes, Transmission Stiction Eliminator is safe for use in CVT transmissions. As with any of our products, please adhere to the dosage ratio stated on the label or “How to Use” tab.

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Tim Turner

    Tim Turner

    I have a 1999 Ford F-250 that would hardly start because injectors were so bad. I bought Stiction Eliminator for diesel engines and put it in and ran it for a couple hours. I burned the starter up so I didn’t fool with it for a year. I put a starter on it and it cranked up immediately. I runs and idles as good as ever. This stuff saved me an injector job.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Gary Edwards

    Gary Edwards

    Put some in my 1996 Dodge van with a carpet cleaning system in it has just turned over 200,000 miles has had some shifting into gear problems when Putting it in drive and reverse have to wait for it to engage only driving about 500 miles annually for a few carpet jobs didn’t want to replace the transmission figured I would give this a try I’ve only driven it to a few jobs and have noticed a remarkable difference no longer have a problem waiting for the transmission to engage, also own a ford 2003 with a 2006 6.0 turbo diesel have completely redone everything I PR remote oil cooler Amsoil bypass oil filter and so forth too much to mention now I am putting my attention to my injectors come spring when I roll it out of my heated garage I’m going to put hot shot secret stiction illuminator in for a regular maintenance program with my mobile one delvack one, when I found out ford flashes the computer to compensate for bad injectors to avoid warrantee that means when my injectors finally show that they are having problems it will be more than one Injector,sorry ford not waiting for that to happen!!👍

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

Continue as a Guest

Don't have an account? Sign Up

• Dissolves varnish and additive residue
• Reduces coefficient of friction
• Improves fuel economy, guaranteed in truck fleets
• Wear protection
• Reduces operating temperature
• Reduces emissions
• Reduces wear
• Smoother gear changes
• Reduces noise and vibration
• Protects rubber seals
• Swells seals 1 1/2 % to 3% and then lubricates them to prevent wear
• Reduces oil leakage
• Extends oil drain intervals
• Fixes automatic transmission

The requirement for higher performance transmissions lubricants has increased considerably in recent years due to the introduction of new and sophisticated transmission systems. The transmission fluid serves as a hydraulic fluid, a heat transfer fluid and lubricating fluid. Over time, varnish and sticky residue (stiction) can form inhibiting the performance of the fluid. Our high performance ester formula is a unique lubricity and cleaning agent, that tenaciously attaches itself to all metal parts that it comes in contact with inside the transmission. The strong polarity pulls deposits off the metal surfaces and puts them back into solution. The metal in a transmission is nearly always positively charged while Transmission Stiction Eliminator is negatively charged. Attachment of a thin layer of Transmission Stiction Eliminator to all metals is natural and not dependent upon temperature, pressure or anything else. An added benefit is a reduction in temperature due to less friction on the critical moving parts.

Directions:

  • 1-2 ounces of TSE treats 1 quart of transmission fluid.
  • 3-4 ounces of TSE treats 2 quarts of transmission fluid.
  • 8 ounces of TSE treats 5 quarts of transmission fluid.
  • 16 ounces of TSE treats 10 quarts of transmission fluid.
  • 24 ounces of TSE treats 15 quarts of transmission fluid.
  • 32 ounces of TSE treats 20 quarts of transmission fluid.

Recommended Frequency:
Works best when added during a fresh fluid change; refer to the owner’s manual for recommended intervals.

SDS
Tech. Data

Evaluation of Hot Shot’s Secret Transmission Stiction Eliminator in a series of dynamometer tests »

FREE SHIPPING on every order (Contiguous US, Exclusions Apply) SHOP NOW

+ +