Infused with FR3 Nano Lubricant Technology
HELPS REDUCE EXTREME HEAT
IMPROVES OXIDATION STABILITY
REDUCES NOISE AND VIBRATION
PROTECTS AGAINST WEAR
BLUE DIAMOND SEVERE DUTY TRANSMISSION FLUID was formulated for severe-duty applications. The formulas are based on 100% poly-alpha-olefin (PAO) Group IV and high-quality Group V synthetic oils, infused with our FR3 Nano Technology, that protects against the major causes of transmission breakdown and helps extend transmission life. Hot Shot’s heavy duty gear oil also provides increased oxidation resistance, thermal stability, deposit and sludge prevention, reduced breakdown, longer drain intervals and higher wear resistance than competitors. BLUE DIAMOND SEVERE DUTY TRANSMISSION FLUID is for use in automatic transmissions where heavy loads and challenging terrain place a high demand on transmissions.
Question
Steve –
I am using Schaeffer #204SAT ALL-TRANS®SUPREME in an HD Dexron III application (TES-295/TES-389).
Is your PAO based BLUE DIAMOND SEVERE DUTY product spec’ed for a HD Dexron III transmission?
I read the production description and Q&A and the best I can determine is maybe (if you are
OK with a Dexron VI).
I’d be interested in a a detailed Properties sheet also.
Love your diesel fuel additive products.
(0) (0) Watch Unwatch
R&D –
Our Blue Diamond severe duty ATF is specified to work with DEXRON VI applications and backwards compatible with DEXRON III applications. Here is our technical data sheet listing the specifications and physical data of our product.
(0) (0)
Question
Dennis James –
Is this ok to mix with factory fluid? In my 2016 Duramax (53k miles) I’m just replacing external filter and draining which wont empty the whole 12 quarts. Want to know if I only top off, will it be fine. Thanks.
(0) (0) Watch Unwatch
R&D –
Our Blue Diamond Multi-Vehicle ATF is compatible with all Dex III and Dex IV fluids. The only thing to be aware of is that you are actually diluting the Blue Diamond PAO base oil, so you will not see all of the benefits from switching to a full fluid change.
(0) (0)
Question
Don –
Will this work with aisin as69rc trans
(0) (0) Watch Unwatch
R&D –
We are working on the development of an ATF+4 fluid which meets the JSW 3309 for the Asin as69rc. Our Blue Diamond Multi-Vehicle ATF meets the JWS 3324 spec which is not backwards compatible.
(0) (0)
Kolin Brighton (verified owner) –
Changed to Blue Diamond in my 2012 X5 Diesel as a preventative since I tow at least twice a week. Truck seems to love it so far, smooth shifts and no temp spikes.
(0) (0) Watch Unwatch
Levi –
Thanks Kolin!
(0) (0)
steven p rachunok –
my dodge cummins has a 68RFE trans. Can I use your fluid instead of the Mopar ATF+4 ?
(0) (0)
R&D –
We currently do not offer a transmission fluid that is compatible with your 68RFE transmission, however we are currently in the process of formulating an ATF+4/dex 3/Mercon 5 compatible fluid… stay tuned!
(0) (0)
Adam D. –
I would assume then that this can’t be used in the ZF 8HP transmissions that so many Ram 1500’s have?
(0) (0)
R&D –
While our product does comply with the specification for these transmissions, we don’t recommend use due to the color being red where the recommended fluid is green; causing warranty voids due to the color difference.
(0) (0)
Question
Brian Irby (verified owner) –
What Transmission fluid should I use in my 2017 F250 6.7
(1) (0) Watch Unwatch
R&D –
Our Blue Diamond Multi-Vehicle ATF is the correct application for transmissions that require Mercon LV. Thanks!
(0) (0)