Infused with FR3 Nano Lubricant Technology
LOWERS OPERATING TEMPERATURE
BLUE DIAMOND SEVERE DUTY GEAR OIL improves thermal stability and friction reduction, protecting against varnish and sludge deposits
REDUCES WEAR
BLUE DIAMOND SEVERE DUTY GEAR OIL is infused with our patented FR3 Nano Technology which helps increase boundary layer protection and improves film strength for extra protection
REDUCES SHEARING
BLUE DIAMOND SEVERE DUTY GEAR OIL reduces shearing under severe duty applications, allowing the oil to remain in specifications for peak performance
IMPROVES OXIDATION STABILITY
BLUE DIAMOND SEVERE DUTY GEAR OIL was formulated specifically for severe duty applications, helping reduce breakdown, lowering oil consumption and extending gear oil change intervals
BLUE DIAMOND SEVERE DUTY GEAR OIL was formulated for severe duty applications. The gear oil additive formulas are based on 100% poly-alpha-olefin (PAO) Group IV and high-quality Group V synthetic oils. The infusion of our patented FR3 Nano Technology and high zinc additive package extends the performance and anti-wear protection to levels unmatched by any other gear oil on the market. BLUE DIAMOND heavy duty gear oil also provides increased oxidation and thermal stability, deposit and sludge prevention, reduced oil breakdown, high wear resistance and longer drain intervals. BLUE DIAMOND heavy duty gear oil is recommended as a gear oil for any demanding severe duty application, such as towing, hauling, challenging terrain driving, commercial use, utility vehicles, heavy equipment, tractors, motor homes, and other severe duty vehicles.
Question
Jerry Austin –
Will this work in my Dana 80 axle?
(0) (0) Watch Unwatch
Levi –
Our Adrenaline R9 gear oil exceeds the specification GL-5 that your axle requires. If you were to use our fluid, it will work with both limited slip and open differential. (However, if your Dana 80 is specifically a limited slip differential, you would have to use a limited slip additive that we do not offer at this time.) Hope that helps!
(0) (0)
Question
skyler –
can i run this in a 16 ram 2500?
(0) (0) Watch Unwatch
Levi –
A 2016 Dodge Ram 2500 is mounted with the 6-speed manual G56 transmission. We currently do not offer a transmission fluid that complies with the specification that the G56 requires, however we are currently in the process of formulating and testing a G56 specific gear oil, thanks!
(0) (1)
Amaury Machado (verified owner) –
First time using this product our truck has 212k and this seems extremely smooth, before as we were loaded when we traveled from east coast to west coast we always are in cruise loaded or empty (65mph Loaded) as we went uphill in the past truck dropped 2 gears regardless of weight now we went did the same route and it dropped 1 gear only so to me its a winner
(1) (0) Watch Unwatch
Levi –
Thank you!
(0) (0)
Question
Chris Collinsworth –
I have a 2016 Fratliner cascadia with a DT12 AUTOMATIC TRANSMISSION. My question is can use ATF in my automatic transmission?
(1) (0) Watch Unwatch
Levi –
Detroit transmissions use synthetic lubricant that meets the requirements of the MB 235.11 specification. Unfortunately, our ATF fluids are much too thin for this application, and do not meet that specification. Thanks!
(0) (2)
cowboy77792 –
He is asking about his Freightliner.
(0) (0)
edward dougherty (verified owner) –
Bought this bottle to refill my rear diff,, fast shipping, just order some oil to see how this test out in my oil samples, oil by-pass, just looking to get the best out of the oil and drain intervals,,2006 5.9 cummins old but awesome engine
(0) (0) Watch Unwatch
Levi –
Thank you, keep us posted!
(1) (0)
mikeybjc –
Quick accurate service.
(0) (0)